Custom UAV battery packs — engineered to your platform.
When the catalog pack doesn’t fit, our OEM engineering team designs voltage, capacity, BMS, connector and harness to match your airframe — fully tested, NDAA-compliant, and produced at your procurement cadence.
Every dimension of the pack is on the table.
Catalog SKUs solve 80% of UAV procurement. The other 20% — where chemistry, voltage, connector or BMS need to change — is exactly where the engineering team lives.
Voltage, capacity & chemistry — engineered to fit your airframe
Cell selection across solid-state, Li-ion (Molicel, Samsung), LiPo — sized for flight time, climb load, payload weight and the temperature envelope your mission profile demands.
Custom BMS profiles · safety + telemetry
Cell balancing, current limits, temperature cutoffs, SoC accuracy and (where required) CAN/SMBUS telemetry — programmed to match your flight controller and ground-station expectations.
XT60 / XT90 / AS150 / EC5 / custom
Power, balance, telemetry and ground harnesses fabricated in-house with crimp/solder validation. We can match any connector your platform OEM specifies — or design a new one.
BIS, UN 38.3, NDAA, ISO 9001 — maintained per program
Test reports, shipping documentation and audit trail are delivered with every production lot. Custom packs ship with the same compliance dossier as our catalog SKUs.
Six steps from platform brief to production supply.
Each step has a deliverable and a sign-off. Nothing moves to production without your engineering approval.
Brief
Send platform specs, mission profile, weight budget and target flight time. We confirm fitment feasibility within 4 hours.
Cell Qualification
Choose between solid-state, Li-ion premium (Molicel, Samsung) or LiPo high-discharge based on flight characteristics and cold-weather window.
Design Review
Detailed pack layout, BMS profile, connector + harness drawings, weight + Wh/kg targets. Approved drawings before tooling.
Prototype
First-article packs delivered for flight tests. Discharge curves, thermal data and cycle-life baseline shared with engineering.
Validation
UN 38.3 + BIS test reports, NDAA documentation, performance correlation against approved drawings. Sign-off before production.
Production
Production-scale supply aligned to your procurement schedule. Serialized packs, batch test reports, dispatch via PAN-India logistics.
Custom packs across the Indian UAV stack.
Every custom pack ships with the full dossier.
Send us your platform specs — we’ll come back with a fitment plan in 4 hours.
Brief us via /contact with mission profile, payload, target flight time and any platform constraints. Verified messages get routed straight to the OEM Solutions Engineer queue.